T.C.T CIRCULAR SAW
Woodworking Blades
- Panel Sizing Saw
- Laminated Board Saw
- Trimming & Sizing Saw
- Scoring Blades
- Multi-rip Saw
- Thin Kerf Multi-saw
Aluminum Saw Blades
CUTTERS & KNIVES
Cutter Heads
Spiral Planing Cutter
- Heavy duty-Alu.
- Heavy duty-Steel
- Light duty-Alu.
- Light duty-Steel
- For Spindle Moulder
- For Copy Shaper
- For Four Side Moulder
Reversible Knives
Profile Knives
FRAME & BAND SAW
Frame Saw
Band Saw
BORING BITS
Solid Carbide Spiral Bits
- Z=1 Up Cut
- Z=2+2 Up & Down Cut
- Z=2 Down Cut
- Z=2 Up Cut
- Z=3 Down Cut Chip-breaker
- Z=3 Up Cut With Chip-breaker
- Z=3 Down Cut
- Z=3 Up Cut
- Z=4 Up Cut With Chip-Breaker
Aluminum Bits
Dowel Drills
- For Panels Blind Holes
- For Panels Through Holes
- Standard For Blind Holes
- Standard For Through Holes
- Hinge Boring Bits
Mortising Bits
PCD TOOLS
Diamond Router Bits
TOOLS HOLDERS
CHUCKS SUPPORT
C-SPANNER
ER CLAMPING NUTS
RETAINING STUD
PRECISON COLLET
TOOL HOLDERS
Laminated Board Saw
TCG teeth with positive hook angle,for cutting single or
double sides.
Laminated MDF and chip board with better finishing
by using of scoring saw.
Pin hole Dia.200-220mm 2/7/42
Pin hole Dia.250-350mm 2/7/42+2/10/60
* low noise blades available upon request
TCG teeth with positive hook angle,for cutting single or
double sides.
Laminated MDF and chip board with better finishing
by using of scoring saw.
Pin hole Dia.200-220mm 2/7/42
Pin hole Dia.250-350mm 2/7/42+2/10/60
* low noise blades available upon request
For Panels Through Holes
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood,wood composites,
plastic and laminated materials.
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood,wood composites,
plastic and laminated materials.
Diamond Router Bits Z=2+2
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min
50x5.5mm
Best knives to make any profiles, special sharpened edge assure you a perfert finish without any more
polishing works.
Best knives to make any profiles, special sharpened edge assure you a perfert finish without any more
polishing works.
Two Flute With Chip Breaker
Used for wood composite,plastic and laminated panels.
Classic fast cutting bits.
Shank=13x50m
=16x50mm
Used for wood composite,plastic and laminated panels.
Classic fast cutting bits.
Shank=13x50m
=16x50mm
Aluminum Bits Long
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
Trimming & Sizing Saw
Universal blade to rip and cross cut
solid wood,plywood,MDF,chipboard for
precise sizing.
Universal blade to rip and cross cut
solid wood,plywood,MDF,chipboard for
precise sizing.
Standard For Blind Holes
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood,
wood composites,plastic and laminated materials.
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in solid wood,
wood composites,plastic and laminated materials.
Diamond Router Bits Z=3+3
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 30m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 30m/min
