Spiral Flute
Used for cutting mortise slots in soft and hard wood.
For deep mortising on solid wood.
Shark=10x40mm
=13x50mm
=16x50mm
Used for cutting mortise slots in soft and hard wood.
For deep mortising on solid wood.
Shark=10x40mm
=13x50mm
=16x50mm
Heavy duty-Alu.
High efficient and effective cutter heads for planning and jointing.
Very long life thanks for the reversible knives system.
Very low cost because of standard knives 14¡Á14¡Á2.0mm for all cutters.
High efficient and effective cutter heads for planning and jointing.
Very long life thanks for the reversible knives system.
Very low cost because of standard knives 14¡Á14¡Á2.0mm for all cutters.
Z=1 Up Cut
Super micrograin carbide
Z=1 spiral cutting edges
Provides an excellent finish on the lower side of the workpiece.
Upward chip ejection.
Super micrograin carbide
Z=1 spiral cutting edges
Provides an excellent finish on the lower side of the workpiece.
Upward chip ejection.
Aluminum Bits Standard
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
Panel Sizing Saw
TCG teeth with positive hook angle,for cutting single side
or double sides.
Laminated MDF and chip board with better finishing
by using of scoring saw.
TCG teeth with positive hook angle,for cutting single side
or double sides.
Laminated MDF and chip board with better finishing
by using of scoring saw.
Pin hole Holzma 2/4/125
Pin hole Selco 4/19/120+2/9/130
For Panels Blind Holes
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in particle boards,
Solid carbide tips made,fine sharpened to
guarantee excellent boring with high resistant of heat.
Used on boring machines equipped with adaptors or chucks.
Used to drill blind holes in particle boards,
40x4.0mm
Best knives to make any profiles, special sharpened edge assure you a perfert finish without any more
polishing works.
Best knives to make any profiles, special sharpened edge assure you a perfert finish without any more
polishing works.
DIN6388ER PRECISON COLLET
Made to DIN6499/B standard. Clamp all type of tools shank and materials.
High vibration dampening results in longer tools life and best finish.
0-0.7mm clamping tolerance.
Suitable for most toolholders of CNC machines.
Made to DIN6499/B standard. Clamp all type of tools shank and materials.
High vibration dampening results in longer tools life and best finish.
0-0.7mm clamping tolerance.
Suitable for most toolholders of CNC machines.
Aluminum Bits Long
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
High efficient and effective bits for carving on all type of aluminum.
5% cobalt premium H.S.S. bits with high flexibility and high quality finish.
SIngle flute spiral cutting edge with upward chip ejection.
Diamond Router Bits Z=2+2
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min