T.C.T CIRCULAR SAW
Woodworking Blades
- Panel Sizing Saw
- Laminated Board Saw
- Trimming & Sizing Saw
- Scoring Blades
- Multi-rip Saw
- Thin Kerf Multi-saw
Aluminum Saw Blades
CUTTERS & KNIVES
Cutter Heads
Spiral Planing Cutter
- Heavy duty-Alu.
- Heavy duty-Steel
- Light duty-Alu.
- Light duty-Steel
- For Spindle Moulder
- For Copy Shaper
- For Four Side Moulder
Reversible Knives
Profile Knives
FRAME & BAND SAW
Frame Saw
Band Saw
BORING BITS
Solid Carbide Spiral Bits
- Z=1 Up Cut
- Z=2+2 Up & Down Cut
- Z=2 Down Cut
- Z=2 Up Cut
- Z=3 Down Cut Chip-breaker
- Z=3 Up Cut With Chip-breaker
- Z=3 Down Cut
- Z=3 Up Cut
- Z=4 Up Cut With Chip-Breaker
Aluminum Bits
Dowel Drills
- For Panels Blind Holes
- For Panels Through Holes
- Standard For Blind Holes
- Standard For Through Holes
- Hinge Boring Bits
Mortising Bits
PCD TOOLS
Diamond Router Bits
TOOLS HOLDERS
CHUCKS SUPPORT
C-SPANNER
ER CLAMPING NUTS
RETAINING STUD
PRECISON COLLET
TOOL HOLDERS
Spiral Flute
Used for cutting mortise slots in soft and hard wood.
For deep mortising on solid wood.
Shark=10x40mm
=13x50mm
=16x50mm
Used for cutting mortise slots in soft and hard wood.
For deep mortising on solid wood.
Shark=10x40mm
=13x50mm
=16x50mm
Two Flute With Chip Breaker
Used for wood composite,plastic and laminated panels.
Classic fast cutting bits.
Shank=13x50m
=16x50mm
Used for wood composite,plastic and laminated panels.
Classic fast cutting bits.
Shank=13x50m
=16x50mm
Four Flute Mortising
Used for cutting mortise slots in soft and hard wood.
High precison bits.
For perfect finish.
Used for cutting mortise slots in soft and hard wood.
High precison bits.
For perfect finish.
