T.C.T CIRCULAR SAW
Woodworking Blades
- Panel Sizing Saw
- Laminated Board Saw
- Trimming & Sizing Saw
- Scoring Blades
- Multi-rip Saw
- Thin Kerf Multi-saw
Aluminum Saw Blades
CUTTERS & KNIVES
Cutter Heads
Spiral Planing Cutter
- Heavy duty-Alu.
- Heavy duty-Steel
- Light duty-Alu.
- Light duty-Steel
- For Spindle Moulder
- For Copy Shaper
- For Four Side Moulder
Reversible Knives
Profile Knives
FRAME & BAND SAW
Frame Saw
Band Saw
BORING BITS
Solid Carbide Spiral Bits
- Z=1 Up Cut
- Z=2+2 Up & Down Cut
- Z=2 Down Cut
- Z=2 Up Cut
- Z=3 Down Cut Chip-breaker
- Z=3 Up Cut With Chip-breaker
- Z=3 Down Cut
- Z=3 Up Cut
- Z=4 Up Cut With Chip-Breaker
Aluminum Bits
Dowel Drills
- For Panels Blind Holes
- For Panels Through Holes
- Standard For Blind Holes
- Standard For Through Holes
- Hinge Boring Bits
Mortising Bits
PCD TOOLS
Diamond Router Bits
TOOLS HOLDERS
CHUCKS SUPPORT
C-SPANNER
ER CLAMPING NUTS
RETAINING STUD
PRECISON COLLET
TOOL HOLDERS
Diamond Router Bits Z=1+1
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 12m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 12m/min
Diamond Router Bits Z=2+2
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 20m/min
Diamond Router Bits Z=3+3
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 30m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 30m/min
Diamond Router Bits Z=3
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 25m/min
Boring and sizing paper laminated chipboard and MDF panels.
Manufactured with splitted compression diamond tips,
very high cutting qua;ity.
Tips are positioned in opposite shear angle,
very good chips evacuation. Max r.p.m 20000.
Feed speed up to 25m/min
