T.C.T CIRCULAR SAW
Woodworking Blades
- Panel Sizing Saw
- Laminated Board Saw
- Trimming & Sizing Saw
- Scoring Blades
- Multi-rip Saw
- Thin Kerf Multi-saw
Aluminum Saw Blades
CUTTERS & KNIVES
Cutter Heads
Spiral Planing Cutter
- Heavy duty-Alu.
- Heavy duty-Steel
- Light duty-Alu.
- Light duty-Steel
- For Spindle Moulder
- For Copy Shaper
- For Four Side Moulder
Reversible Knives
Profile Knives
FRAME & BAND SAW
Frame Saw
Band Saw
BORING BITS
Solid Carbide Spiral Bits
- Z=1 Up Cut
- Z=2+2 Up & Down Cut
- Z=2 Down Cut
- Z=2 Up Cut
- Z=3 Down Cut Chip-breaker
- Z=3 Up Cut With Chip-breaker
- Z=3 Down Cut
- Z=3 Up Cut
- Z=4 Up Cut With Chip-Breaker
Aluminum Bits
Dowel Drills
- For Panels Blind Holes
- For Panels Through Holes
- Standard For Blind Holes
- Standard For Through Holes
- Hinge Boring Bits
Mortising Bits
PCD TOOLS
Diamond Router Bits
TOOLS HOLDERS
CHUCKS SUPPORT
C-SPANNER
ER CLAMPING NUTS
RETAINING STUD
PRECISON COLLET
TOOL HOLDERS
Four Edges Knives
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
Three Edges Knives
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
Two Edges Knives
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
Micro-grain carbide knives developed for cutter heads and
groove cutters for cutting,grooving and rebating with long life.
Disposable system drives to the lowest cost per cut.
